News
ept Products
Information Service
Power Supply Connections Based on Press-Fit Technology
ept power terminals are specially designed to provide power supply connections to circuit boards.The cable is connected using a cable lug that is screwed in place or via a tab terminal (Faston).
Operating Temperature Range | -55°C to +125°C |
---|
Contact Material | Copper alloy |
---|
Thread | M4 |
---|
Environment | RoHS compliant |
---|
For details please download the drawings or contact ept directly.
Material | imm. Sn printed circuit boards |
---|---|
Nominal Hole | Ø 1.6 mm |
A PCB Thickness | min 2.9 mm |
B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
C Drill Hole | 1.75 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | imm. Sn plating, max. 1.5 µm |
F Annular Ring | min. 0.1 mm |
Material | Ni, Au printed circuit boards |
---|---|
Nominal Hole | Ø 1.6 mm |
A PCB Thickness | min 2.9 mm |
B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
C Drill Hole | 1.75 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | Ni, Au plating, 0.05 - 0.2 µm Au over 2.5 - 5 µm Ni |
F Annular Ring | min. 0.1 mm |
Material | HAL Sn printed circuit boards |
---|---|
Nominal Hole | Ø 1.6 mm |
A PCB Thickness | min 2.9 mm |
B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
C Drill Hole | 1.75 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | HAL Sn, 5 - 15 µm |
F Annular Ring | min. 0.1 mm |
Plated through-hole according to IEC 60352-5
Find the right connector for your requirements
Touching allowed - order for free here!
Register now for the EPT Newsletter and get your whitepaper for free!
You may unsubscribe this newsletter at any time.